FOR PROFESSIONAL USE 1. Pour the pebble drops into an empty metal wax can and heat them in a COCOWAX or other professional wax warmer. 2. Set heat to READ for approximately 20 to 30 minutes. 3. Do not melt wax completely. Wax should be thick in consistency and have a center island of non-melted wax. Wax should be soft around the sides. 4. Before hair removal, check if the wax temperature is comfortable by dipping applicator into wax and applying a small amount to the inside of the wrist. If wax runs off applicator, It's too hot-wax should cling to the applicator. 5. After cleansing skin with Cleanser, use a new applicator to apply a thin, even layer of wax in the opposite direction of hair growth, and then back down to encapsulate the hair. For a better grip when removing wax leave a thicker edge at the end of the strip of wax. 6. Allow wax to cool on skin until wax, hardens. Then raise the edge of the strip and remove quickly, pulling against hair growth. 7. After hair removal, apply Release to eliminate any wax residue, followed by COCOWAX Cool to help soothe skin. 8. Finally, condition skin with COCOWAX Hydrate to leave the skin soft. 9. Once you've completed your service, replenish can with Pebble Wax.